View 12-22-R6GHC-A30-2C_3722402.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

everlight electronics co., ltd. http:// www.everlight.com rev.1 page: 1 of 12 device no. prepared date : 30-jun-2011 prepared by: haizheng gao technical data sheet right angle lens chip leds with bi-color(multi-colo r) 12-22/r6ghc-a33/2c features ? package in 8mm tape on 7 diameter reel. ? compatible with automatic placement equipment. ? compatible with infrared and vapor phase reflow solder process. ? multi-color type. ? pb-free. ? the product itself will remain within rohs complian t version. descriptions ? the 12-22 smd led is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ? besides, lightweight makes them ideal for miniature applications. etc. applications ? backlighting in dashboard and switch. ? telecommunication: indicator and backlighting in telephone and fax. ? flat backlight for lcd, switch and symbol. ? general use. device selection guide chip emitted color resin color type material r6 algainp brilliant red water clear gh ingan brilliant green
12-22/r6ghc-a30/2c everlight electronics co., ltd. http:// www.everlight.com rev.1 page: 2 of 12 device no. prepared date : 30-jun-2011 prepared by: haizheng gao package outline dimensions note: the tolerances unless mentioned is 0.1mm,unit = mm
12-22/r6ghc-a30/2c everlight electronics co., ltd. http:// www.everlight.com rev.1 page: 3 of 12 device no. prepared date : 30-jun-2011 prepared by: haizheng gao absolute maximum ratings (ta=25 ) parameter symbol rating unit reverse voltage v r 5 v forward current i f r6:25 gh:25 ma peak forward current (duty 1/10 @1khz) i fp r6:60 gh:100 ma power dissipation pd r6:60 gh:95 mw electrostatic discharge(hbm) esd r6:2000 gh:150 v operating temperature topr -40 ~ +85 storage temperature tstg -40 ~ +90 soldering temperature tsol reflow soldering : 260 for 10 sec. hand soldering : 350 for 3 sec.
12-22/r6ghc-a30/2c everlight electronics co., ltd. http:// www.everlight.com rev.1 page: 4 of 12 device no. prepared date : 30-jun-2011 prepared by: haizheng gao electro-optical characteristics (ta=25 ) parameter symbol min. typ. max. unit condition luminous intensity iv r6 gh 72.0 112 ---- ---- 180 285 mcd i f =20ma viewing angle 2 1/2 ----- 120 ----- deg peak wavelength p r6 gh ----- 632 518 ----- nm dominant wavelength d r6 gh 617.5 517.5 ----- ----- 633.5 529.5 nm spectrum radiation bandwidth r6 gh ----- 20 35 ----- nm forward voltage v f r6 gh 1.7 2.7 2.0 3.3 2.4 3.7 v reverse current i r r6 gh ----- ----- 10 50 a v r =5v notes: 1.tolerance of luminous intensity 11% 2.tolerance of dominant wavelength 1nm
12-22/r6ghc-a30/2c everlight electronics co., ltd. http:// www.everlight.com rev.1 page: 5 of 12 device no. prepared date : 30-jun-2011 prepared by: haizheng gao bin range of luminous intensity r6 bin min max unit condition q 72.0 112 mcd i f =20ma r 112 180 gh bin min max unit condition r 112 180 mcd i f =20ma s 180 285 bin range of dom. wavelength r6 group bin min max unit condition a e4 617.5 621.5 nm i f =20ma e5 621.5 625.5 e6 625.5 629.5 e7 629.5 633.5 gh group bin min max unit condition c b10 517.5 519.5 nm i f =20ma b11 519.5 521.5 b12 521.5 523.5 b13 523.5 525.5 b14 525.5 527.5 b15 527.5 529.5 notes: 1.tolerance of luminous intensity 11% 2. tolerance of dominant wavelength: 1nm
12-22/r6ghc-a30/2c everlight electronics co., ltd. http:// www.everlight.com rev.1 page: 6 of 12 device no. prepared date : 30-jun-2011 prepared by: haizheng gao typical electro-optical characteristics curves r6 relative luminous intensity ambient temperature t (c ) a % ) ( relative luminous intensity ( ) % wavelength (nm) ta=25c forward voltage v (v) f forward current i (ma) relative luminous intensity ( ) % forward current i (ma) ta=25c ambient temperature t (c a ) forward current i (ma) ta=25c 0 0.5 0.3 0.1 0.7 0.8 0.9 1.0 40 80 0.6 0.2 0.4 90 70 60 50 10 20 30 ta=25c
12-22/r6ghc-a30/2c everlight electronics co., ltd. http:// www.everlight.com rev.1 page: 7 of 12 device no. prepared date : 30-jun-2011 prepared by: haizheng gao typical electro-optical characteristics curves gh relative luminous intensity ambient temperature t (c ) a % ) ( relative luminous intensity ( ) % wavelength (nm) ta=25c forward voltage v (v) f forward current i (ma) relative luminous intensity ( ) % forward current i (ma) ta=25c ambient temperature t (c a ) forward current i (ma) ta=25c 0 0.5 0.3 0.1 0.7 0.8 0.9 1.0 40 80 0.6 0.2 0.4 90 70 60 50 10 20 30 ta=25c
12-22/r6ghc-a30/2c everlight electronics co., ltd. http:// www.everlight.com rev.1 page: 8 of 12 device no. prepared date : 30-jun-2011 prepared by: haizheng gao label explanation cat: luminous intensity rank hue: dom. wavelength rank ref: forward voltage rank reel dimensions note: the tolerances unless mentioned is 0.1mm, unit = mm rohs pb cpn : p n : xxxxxxxxxxxxx xxxxxxxxxxxxx qty : xxx lot no : xxxxxxxxxx reference : xxxxxxxx cat : xxx hue : xxx ref : xxx everlight made in taiwan
12-22/r6ghc-a30/2c everlight electronics co., ltd. http:// www.everlight.com rev.1 page: 9 of 12 device no. prepared date : 30-jun-2011 prepared by: haizheng gao carrier tape dimensions: loaded quantity 2000 pcs p er reel note: the tolerances unless mentioned is 0.1mm, unit = mm moisture resistant packaging label desiccant label aluminum moisture-proof bag
12-22/r6ghc-a30/2c everlight electronics co., ltd. http:// www.everlight.com rev.1 page: 10 of 12 device no. prepared date : 30-jun-2011 prepared by: haizheng gao reliability test items and conditions the reliability of products shall be satisfied with items listed below. confidence level 90% ltpd 10% no. items test condition test hours/cycles sample size ac/re 1 reflow soldering temp. : 260 5 min. 5sec. 6 min. 22 pcs. 0/1 2 temperature cycle h : +100 15min 5 min l : -40 15min 300 cycles 22 pcs. 0/1 3 thermal shock h : +100 5min 10 sec l : -10 5min 300 cycles 22 pcs. 0/1 4 high temperature storage temp. : 100 1000 hrs. 22 pcs. 0/1 5 low temperature storage temp. : -40 1000 hrs. 22 pcs. 0/1 6 dc operating life i f = 20 ma 1000 hrs. 22 pcs. 0/1 7 high temperature / high humidity 85 / 85%rh 1000 hrs. 22 pcs. 0/1
12-22/r6ghc-a30/2c everlight electronics co., ltd. http:// www.everlight.com rev.1 page: 11 of 12 device no. prepared date : 30-jun-2011 prepared by: haizheng gao precautions for use 1. over-current-proof customer must apply resistors for protection , othe rwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the produ cts are ready to use. 2.2 before opening the package, the leds should be kept at 30 or less and 90%rh or less. 2.3 after opening the package: the led's floor life is 1 year under 30 or less and 60% rh or less. if unused leds remain, it should be stored in moist ure proof packages. 2.4 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb-free solder temperature profile 3.2 reflow soldering should not be done more than t wo times. 3.3 when soldering, do not put stress on the leds d uring heating. 3.4 after soldering, do not warp the circuit board. 3.2 reflow soldering should not be done more than t wo times. 3.3 when soldering, do not put stress on the leds d uring heating. 3.4 after soldering, do not warp the circuit board.
12-22/r6ghc-a30/2c everlight electronics co., ltd. http:// www.everlight.com rev.1 page: 12 of 12 device no. prepared date : 30-jun-2011 prepared by: haizheng gao 4.soldering iron each terminal is to go to the tip of soldering iro n temperature less than 350 for 3 seconds within once in less than the soldering iron capacit y 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds hav e been soldered. when repairing is unavoidable, a double-head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing. everlight electronics co., ltd. tel: 886-2-2267-2000, 2267-9936 office: no 25, lane 76, sec 3, chung yang rd, f ax: 886-2267-6244, 2267-6189, 2267-6306 tucheng, taipei 236, taiwan, r.o.c http:// www.everlight.com

▲Up To Search▲

Price & Availability of 12-22-R6GHC-A30-2C

	To Download 12-22-R6GHC-A30-2C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .